(kicad_pcb (version 20171130) (host pcbnew "(5.1.7)-1")

  (general
    (thickness 1.6)
    (drawings 135)
    (tracks 126)
    (zones 0)
    (modules 652)
    (nets 1)
  )

  (page A4)
  (layers
    (0 F.Cu signal hide)
    (31 B.Cu signal hide)
    (32 B.Adhes user hide)
    (33 F.Adhes user hide)
    (34 B.Paste user hide)
    (35 F.Paste user hide)
    (36 B.SilkS user)
    (37 F.SilkS user)
    (38 B.Mask user hide)
    (39 F.Mask user hide)
    (40 Dwgs.User user hide)
    (41 Cmts.User user hide)
    (42 Eco1.User user hide)
    (43 Eco2.User user hide)
    (44 Edge.Cuts user)
    (45 Margin user hide)
    (46 B.CrtYd user hide)
    (47 F.CrtYd user hide)
    (48 B.Fab user hide)
    (49 F.Fab user hide)
  )

  (setup
    (last_trace_width 2)
    (user_trace_width 2)
    (user_trace_width 3)
    (trace_clearance 0.2)
    (zone_clearance 0.508)
    (zone_45_only no)
    (trace_min 0.2)
    (via_size 0.8)
    (via_drill 0.4)
    (via_min_size 0.4)
    (via_min_drill 0.3)
    (uvia_size 0.3)
    (uvia_drill 0.1)
    (uvias_allowed no)
    (uvia_min_size 0.2)
    (uvia_min_drill 0.1)
    (edge_width 0.05)
    (segment_width 0.2)
    (pcb_text_width 0.3)
    (pcb_text_size 1.5 1.5)
    (mod_edge_width 0.12)
    (mod_text_size 1 1)
    (mod_text_width 0.15)
    (pad_size 2 2)
    (pad_drill 1)
    (pad_to_mask_clearance 0)
    (aux_axis_origin 0 0)
    (visible_elements 7EFFF67F)
    (pcbplotparams
      (layerselection 0x010e0_ffffffff)
      (usegerberextensions false)
      (usegerberattributes true)
      (usegerberadvancedattributes true)
      (creategerberjobfile false)
      (excludeedgelayer true)
      (linewidth 0.100000)
      (plotframeref false)
      (viasonmask false)
      (mode 1)
      (useauxorigin false)
      (hpglpennumber 1)
      (hpglpenspeed 20)
      (hpglpendiameter 15.000000)
      (psnegative false)
      (psa4output false)
      (plotreference true)
      (plotvalue true)
      (plotinvisibletext false)
      (padsonsilk false)
      (subtractmaskfromsilk false)
      (outputformat 1)
      (mirror false)
      (drillshape 0)
      (scaleselection 1)
      (outputdirectory ""))
  )

  (net 0 "")

  (net_class Default "This is the default net class."
    (clearance 0.2)
    (trace_width 0.25)
    (via_dia 0.8)
    (via_drill 0.4)
    (uvia_dia 0.3)
    (uvia_drill 0.1)
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF5F)
    (at 10.16 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF55)
    (at 12.7 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF4B)
    (at 15.24 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF41)
    (at 0 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF37)
    (at 2.54 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF2D)
    (at 5.08 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF23)
    (at -2.54 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF19)
    (at -5.08 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF0F)
    (at 7.62 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EF05)
    (at -10.16 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EEFB)
    (at -12.7 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7EEF1)
    (at -7.62 47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDF6)
    (at 13.97 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDEC)
    (at -3.81 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDE2)
    (at 11.43 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDD8)
    (at 1.27 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDCE)
    (at -8.89 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDC4)
    (at -11.43 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDBA)
    (at 6.35 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDB0)
    (at 13.97 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7EDA6)
    (at -13.97 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED9C)
    (at -6.35 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED92)
    (at -3.81 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED88)
    (at 3.81 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED7E)
    (at 11.43 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED74)
    (at 1.27 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED6A)
    (at -8.89 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED60)
    (at 8.89 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED56)
    (at 3.81 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED4C)
    (at -6.35 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED42)
    (at -1.27 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED38)
    (at 8.89 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED2E)
    (at -11.43 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED24)
    (at -1.27 44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED1A)
    (at 6.35 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7ED10)
    (at -13.97 41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E765)
    (at -3.81 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E75B)
    (at 13.97 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E751)
    (at -13.97 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E747)
    (at 19.05 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E73D)
    (at -16.51 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E733)
    (at -1.27 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E729)
    (at -19.05 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E71F)
    (at -16.51 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E715)
    (at -6.35 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E70B)
    (at 22.86 22.86)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E701)
    (at 19.05 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6F7)
    (at 11.43 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6ED)
    (at -6.35 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6E3)
    (at -11.43 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6D9)
    (at -16.51 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6CF)
    (at 1.27 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6C5)
    (at 6.35 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6BB)
    (at 13.97 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6B1)
    (at -16.51 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E6A7)
    (at 8.89 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E69D)
    (at -19.05 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E693)
    (at -22.86 22.86)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E689)
    (at -1.27 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E67F)
    (at -3.81 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E675)
    (at 11.43 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E66B)
    (at -8.89 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E661)
    (at -22.86 25.4)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E657)
    (at -13.97 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E64D)
    (at -22.86 27.94)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E643)
    (at 16.51 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E639)
    (at -13.97 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E62F)
    (at -22.86 30.48)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E625)
    (at -11.43 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E61B)
    (at 16.51 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E611)
    (at 1.27 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E607)
    (at -8.89 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5FD)
    (at 11.43 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E5F3)
    (at 22.86 27.94)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5E9)
    (at 6.35 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5DF)
    (at -8.89 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5D5)
    (at 3.81 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5CB)
    (at 3.81 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5C1)
    (at 1.27 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5B7)
    (at 3.81 21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5AD)
    (at -19.05 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E5A3)
    (at 3.81 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E599)
    (at -6.35 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E58F)
    (at -8.89 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E585)
    (at 8.89 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E57B)
    (at -3.81 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E571)
    (at 6.35 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E567)
    (at 16.51 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E55D)
    (at 16.51 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E553)
    (at -22.86 40.64)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E549)
    (at 19.05 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E53F)
    (at 8.89 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E535)
    (at 1.27 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E52B)
    (at 19.05 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E521)
    (at 22.86 25.4)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E517)
    (at -6.35 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E50D)
    (at 11.43 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E503)
    (at 6.35 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E4F9)
    (at -3.81 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E4EF)
    (at 22.86 40.64)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E4E5)
    (at 1.27 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E4DB)
    (at -11.43 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E4D1)
    (at -1.27 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E4C7)
    (at 8.89 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E4BD)
    (at 13.97 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E4B3)
    (at -11.43 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E4A9)
    (at -1.27 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E49F)
    (at -19.05 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E495)
    (at 16.51 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E48B)
    (at -8.89 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E481)
    (at 3.81 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E477)
    (at -16.51 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E46D)
    (at 3.81 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E463)
    (at -11.43 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E459)
    (at -19.05 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E44F)
    (at -19.05 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E445)
    (at -3.81 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E43B)
    (at 13.97 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E431)
    (at -16.51 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E427)
    (at 13.97 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E41D)
    (at -22.86 38.1)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E413)
    (at -3.81 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E409)
    (at 8.89 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E3FF)
    (at -22.86 35.56)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3F5)
    (at -13.97 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3EB)
    (at 13.97 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3E1)
    (at 11.43 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3D7)
    (at -13.97 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3CD)
    (at 8.89 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3C3)
    (at -8.89 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3B9)
    (at 19.05 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3AF)
    (at -6.35 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E3A5)
    (at -11.43 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E39B)
    (at 6.35 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E391)
    (at 3.81 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E387)
    (at 16.51 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E37D)
    (at 11.43 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E373)
    (at -1.27 36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E369)
    (at -13.97 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E35F)
    (at -16.51 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E355)
    (at 19.05 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E34B)
    (at -19.05 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E341)
    (at 13.97 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E337)
    (at -13.97 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E32D)
    (at 8.89 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E323)
    (at 16.51 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E319)
    (at -6.35 39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E30F)
    (at 11.43 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E305)
    (at 19.05 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2FB)
    (at 8.89 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E2F1)
    (at 22.86 30.48)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2E7)
    (at -11.43 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2DD)
    (at -16.51 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2D3)
    (at 1.27 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2C9)
    (at -1.27 24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2BF)
    (at -11.43 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2B5)
    (at 19.05 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2AB)
    (at 13.97 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E2A1)
    (at 1.27 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E297)
    (at -22.86 33.02)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E28D)
    (at -8.89 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E283)
    (at -19.05 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E279)
    (at -1.27 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E26F)
    (at 6.35 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E265)
    (at -3.81 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E25B)
    (at 11.43 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E251)
    (at 16.51 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E247)
    (at -8.89 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E23D)
    (at 22.86 35.56)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E233)
    (at -6.35 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E229)
    (at -1.27 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E21F)
    (at 22.86 33.02)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E215)
    (at -6.35 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E20B)
    (at 6.35 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E201)
    (at 3.81 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7E1F7)
    (at 22.86 38.1)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E1ED)
    (at -3.81 29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E1E3)
    (at -13.97 26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E1D9)
    (at 1.27 34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7E1CF)
    (at 6.35 31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DC25)
    (at 13.97 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DC1B)
    (at -3.81 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7DC11)
    (at 22.86 7.62)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DC07)
    (at 13.97 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBFD)
    (at -13.97 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBF3)
    (at -16.51 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBE9)
    (at -1.27 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBDF)
    (at 19.05 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBD5)
    (at -8.89 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBCB)
    (at -16.51 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBC1)
    (at -19.05 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBB7)
    (at -3.81 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBAD)
    (at -16.51 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DBA3)
    (at 6.35 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB99)
    (at 8.89 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB8F)
    (at -19.05 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB85)
    (at -6.35 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7DB7B)
    (at 22.86 2.54)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7DB71)
    (at -22.86 5.08)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB67)
    (at 19.05 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB5D)
    (at -13.97 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB53)
    (at 11.43 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7DB49)
    (at -22.86 7.62)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB3F)
    (at 16.51 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB35)
    (at -1.27 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB2B)
    (at -6.35 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB21)
    (at -13.97 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB17)
    (at -19.05 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB0D)
    (at 11.43 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DB03)
    (at 11.43 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DAF9)
    (at -8.89 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7DAEF)
    (at -22.86 10.16)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DAE5)
    (at 3.81 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DADB)
    (at -11.43 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DAD1)
    (at 3.81 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DAC7)
    (at 1.27 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DABD)
    (at -6.35 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DAB3)
    (at -11.43 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DAA9)
    (at 3.81 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA9F)
    (at 16.51 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA95)
    (at 1.27 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA8B)
    (at -8.89 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA81)
    (at -16.51 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA77)
    (at 6.35 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA6D)
    (at 3.81 1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7DA63)
    (at -22.86 2.54)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA59)
    (at 1.27 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA4F)
    (at 8.89 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7DA45)
    (at 22.86 5.08)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA3B)
    (at -6.35 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA31)
    (at -8.89 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA27)
    (at 8.89 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA1D)
    (at 1.27 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA13)
    (at 11.43 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7DA09)
    (at 6.35 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9FF)
    (at 6.35 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D9F5)
    (at 22.86 20.32)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9EB)
    (at -3.81 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9E1)
    (at -3.81 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9D7)
    (at 1.27 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9CD)
    (at -11.43 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9C3)
    (at 16.51 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9B9)
    (at 19.05 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9AF)
    (at 16.51 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D9A5)
    (at -1.27 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D99B)
    (at -22.86 20.32)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D991)
    (at 8.89 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D987)
    (at 19.05 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D97D)
    (at 13.97 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D973)
    (at -11.43 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D969)
    (at -19.05 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D95F)
    (at -1.27 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D955)
    (at 13.97 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D94B)
    (at -19.05 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D941)
    (at 16.51 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D937)
    (at -19.05 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D92D)
    (at 13.97 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D923)
    (at -13.97 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D919)
    (at -8.89 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D90F)
    (at -3.81 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D905)
    (at -16.51 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D8FB)
    (at -22.86 17.78)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D8F1)
    (at -3.81 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D8E7)
    (at 8.89 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D8DD)
    (at -22.86 15.24)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D8D3)
    (at -16.51 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D8C9)
    (at -16.51 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D8BF)
    (at -13.97 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D8B5)
    (at 13.97 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D8AB)
    (at -1.27 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D8A1)
    (at 3.81 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D897)
    (at 11.43 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D88D)
    (at 19.05 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D883)
    (at 3.81 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D879)
    (at 19.05 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D86F)
    (at -13.97 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D865)
    (at -6.35 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D85B)
    (at 3.81 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D851)
    (at -8.89 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D847)
    (at -6.35 19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D83D)
    (at -11.43 16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D833)
    (at 11.43 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D829)
    (at 6.35 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D81F)
    (at -11.43 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D815)
    (at 16.51 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D80B)
    (at -13.97 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D801)
    (at 8.89 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7F7)
    (at -19.05 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7ED)
    (at 13.97 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7E3)
    (at 16.51 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7D9)
    (at 8.89 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7CF)
    (at 19.05 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7C5)
    (at 8.89 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7BB)
    (at -16.51 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7B1)
    (at 1.27 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D7A7)
    (at -1.27 3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D79D)
    (at -11.43 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D793)
    (at 13.97 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D789)
    (at 1.27 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D77F)
    (at -11.43 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D775)
    (at -22.86 12.7)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D76B)
    (at 22.86 10.16)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D761)
    (at -8.89 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D757)
    (at -19.05 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D74D)
    (at 11.43 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D743)
    (at -1.27 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D739)
    (at 6.35 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D72F)
    (at 19.05 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D725)
    (at 3.81 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D71B)
    (at -3.81 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D711)
    (at 11.43 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D707)
    (at 6.35 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D6FD)
    (at 16.51 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D6F3)
    (at -8.89 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D6E9)
    (at 22.86 15.24)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D6DF)
    (at -13.97 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D6D5)
    (at -6.35 6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D6CB)
    (at 22.86 17.78)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D6C1)
    (at 1.27 13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D6B7)
    (at -1.27 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D6AD)
    (at 22.86 12.7)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D6A3)
    (at 6.35 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D699)
    (at -6.35 11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D68F)
    (at -3.81 8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D0E5)
    (at -11.43 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D0DB)
    (at 6.35 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D0D1)
    (at -19.05 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D0C7)
    (at 13.97 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7D0BD)
    (at 22.86 0)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D0B3)
    (at 16.51 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D0A9)
    (at 8.89 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D09F)
    (at 19.05 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D095)
    (at 13.97 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D08B)
    (at -3.81 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D081)
    (at -1.27 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D077)
    (at 1.27 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D06D)
    (at 11.43 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D063)
    (at -3.81 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D059)
    (at 19.05 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D04F)
    (at 6.35 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D045)
    (at -6.35 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D03B)
    (at 16.51 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D031)
    (at -8.89 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D027)
    (at -1.27 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D01D)
    (at 8.89 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D013)
    (at 13.97 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7D009)
    (at -3.81 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CFFF)
    (at 1.27 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CFF5)
    (at 16.51 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CFEB)
    (at -19.05 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CFE1)
    (at -19.05 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CFD7)
    (at -8.89 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CFCD)
    (at -22.86 0)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CFC3)
    (at -11.43 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CFB9)
    (at -13.97 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CFAF)
    (at -16.51 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CFA5)
    (at -22.86 -2.54)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF9B)
    (at -3.81 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CF91)
    (at -22.86 -5.08)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF87)
    (at 13.97 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF7D)
    (at -1.27 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF73)
    (at 11.43 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF69)
    (at 19.05 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF5F)
    (at 3.81 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF55)
    (at 3.81 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF4B)
    (at 19.05 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF41)
    (at -16.51 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF37)
    (at -13.97 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF2D)
    (at -6.35 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF23)
    (at 3.81 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF19)
    (at -8.89 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF0F)
    (at -6.35 -1.27)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CF05)
    (at 11.43 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CEFB)
    (at -16.51 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CEF1)
    (at -11.43 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CEE7)
    (at -13.97 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CEDD)
    (at 8.89 -3.81)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CED3)
    (at 22.86 -2.54)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CEC9)
    (at 6.35 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CEBF)
    (at 1.27 -6.35)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CEB5)
    (at 22.86 -5.08)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CEAB)
    (at -11.43 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CEA1)
    (at 16.51 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CE97)
    (at 22.86 -7.62)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE8D)
    (at -1.27 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE83)
    (at 8.89 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE79)
    (at -19.05 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE6F)
    (at 8.89 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE65)
    (at 16.51 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE5B)
    (at 19.05 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE51)
    (at -16.51 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE47)
    (at 13.97 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE3D)
    (at -13.97 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE33)
    (at -6.35 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE29)
    (at -3.81 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE1F)
    (at 11.43 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE15)
    (at -11.43 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CE0B)
    (at 1.27 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CE01)
    (at 22.86 -10.16)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CDF7)
    (at -8.89 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CDED)
    (at 6.35 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CDE3)
    (at -19.05 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CDD9)
    (at 3.81 -8.89)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CDCF)
    (at -22.86 -7.62)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CDC5)
    (at -1.27 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CDBB)
    (at 1.27 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CDB1)
    (at 11.43 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CDA7)
    (at 6.35 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD9D)
    (at 19.05 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD93)
    (at 13.97 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD89)
    (at 6.35 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD7F)
    (at -3.81 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD75)
    (at -11.43 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD6B)
    (at -13.97 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD61)
    (at -6.35 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD57)
    (at 8.89 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD4D)
    (at 16.51 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD43)
    (at -8.89 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD39)
    (at -1.27 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD2F)
    (at 1.27 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD25)
    (at 8.89 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CD1B)
    (at 22.86 -15.24)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD11)
    (at 13.97 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CD07)
    (at -3.81 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CCFD)
    (at -11.43 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CCF3)
    (at -1.27 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CCE9)
    (at 22.86 -12.7)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CCDF)
    (at 11.43 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CCD5)
    (at -22.86 -12.7)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CCCB)
    (at 19.05 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CCC1)
    (at 3.81 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CCB7)
    (at 16.51 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CCAD)
    (at -13.97 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CCA3)
    (at -19.05 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC99)
    (at -8.89 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC8F)
    (at -13.97 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC85)
    (at -8.89 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC7B)
    (at -16.51 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CC71)
    (at -22.86 -10.16)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC67)
    (at -19.05 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC5D)
    (at -6.35 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC53)
    (at -6.35 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC49)
    (at 11.43 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC3F)
    (at 3.81 -11.43)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC35)
    (at 1.27 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC2B)
    (at -16.51 -13.97)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC21)
    (at -16.51 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC17)
    (at 6.35 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CC0D)
    (at 3.81 -16.51)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CC03)
    (at -22.86 -15.24)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CBF9)
    (at 19.05 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CBEF)
    (at 13.97 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CBE5)
    (at -3.81 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CBDB)
    (at -11.43 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CBD1)
    (at -1.27 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CBC7)
    (at 22.86 -17.78)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CBBD)
    (at -19.05 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CBB3)
    (at -13.97 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CBA9)
    (at 8.89 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CB9F)
    (at 16.51 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CB95)
    (at -6.35 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CB8B)
    (at 11.43 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CB81)
    (at 1.27 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CB77)
    (at -8.89 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CB6D)
    (at -16.51 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CB63)
    (at 6.35 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7CB59)
    (at 3.81 -19.05)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7CB4F)
    (at -22.86 -17.78)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C874)
    (at 16.51 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C86A)
    (at 8.89 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C860)
    (at 19.05 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C856)
    (at 13.97 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C84C)
    (at -3.81 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C842)
    (at -11.43 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C838)
    (at 22.86 -20.32)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C82E)
    (at -19.05 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C824)
    (at -1.27 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C81A)
    (at 1.27 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C810)
    (at 11.43 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C806)
    (at 6.35 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7FC)
    (at 19.05 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7F2)
    (at 13.97 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7E8)
    (at 6.35 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7DE)
    (at -3.81 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7D4)
    (at -11.43 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7CA)
    (at -13.97 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7C0)
    (at -6.35 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7B6)
    (at 8.89 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7AC)
    (at 16.51 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C7A2)
    (at -8.89 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C798)
    (at -1.27 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C78E)
    (at 1.27 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C784)
    (at 8.89 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C77A)
    (at 22.86 -25.4)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C770)
    (at 13.97 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C766)
    (at -3.81 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C75C)
    (at -11.43 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C752)
    (at -1.27 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C748)
    (at 22.86 -22.86)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C73E)
    (at 11.43 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C734)
    (at -22.86 -22.86)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C72A)
    (at 19.05 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C720)
    (at 3.81 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C716)
    (at 16.51 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C70C)
    (at -13.97 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C702)
    (at -19.05 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C6F8)
    (at -8.89 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C6EE)
    (at -13.97 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C6E4)
    (at -8.89 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C6DA)
    (at -16.51 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C6D0)
    (at -22.86 -20.32)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C6C6)
    (at -19.05 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C6BC)
    (at -6.35 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C6B2)
    (at -6.35 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C6A8)
    (at 11.43 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C69E)
    (at 3.81 -21.59)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C694)
    (at 1.27 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C68A)
    (at -16.51 -24.13)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C680)
    (at -16.51 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C676)
    (at 6.35 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C66C)
    (at 3.81 -26.67)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C662)
    (at -22.86 -25.4)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C658)
    (at 19.05 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C64E)
    (at 13.97 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C644)
    (at -3.81 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C63A)
    (at -11.43 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C630)
    (at -1.27 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C626)
    (at 22.86 -27.94)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C61C)
    (at -19.05 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C612)
    (at -13.97 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C608)
    (at 8.89 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C5FE)
    (at 16.51 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C5F4)
    (at -6.35 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C5EA)
    (at 11.43 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C5E0)
    (at 1.27 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C5D6)
    (at -8.89 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C5CC)
    (at -16.51 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C5C2)
    (at 6.35 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C5B8)
    (at 3.81 -29.21)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C5AE)
    (at -22.86 -27.94)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C43B)
    (at -1.27 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C431)
    (at 1.27 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C427)
    (at 8.89 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C41D)
    (at 22.86 -30.48)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C413)
    (at 13.97 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C409)
    (at -3.81 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3FF)
    (at -11.43 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3F5)
    (at 19.05 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3EB)
    (at 16.51 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3E1)
    (at -8.89 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3D7)
    (at -13.97 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3CD)
    (at -19.05 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3C3)
    (at -6.35 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3B9)
    (at 11.43 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3AF)
    (at -16.51 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C3A5)
    (at 6.35 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C39B)
    (at 3.81 -31.75)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C391)
    (at -22.86 -30.48)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C387)
    (at 19.05 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C37D)
    (at 13.97 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C373)
    (at -3.81 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C369)
    (at -11.43 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C35F)
    (at -1.27 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C355)
    (at 22.86 -33.02)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C34B)
    (at -19.05 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C341)
    (at -13.97 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C337)
    (at 8.89 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C32D)
    (at 16.51 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C323)
    (at -6.35 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C319)
    (at 11.43 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C30F)
    (at 1.27 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C305)
    (at -8.89 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C2FB)
    (at -16.51 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C2F1)
    (at 6.35 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C2E7)
    (at 3.81 -34.29)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C2DD)
    (at -22.86 -33.02)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C21E)
    (at 19.05 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C214)
    (at 13.97 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C20A)
    (at -3.81 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C200)
    (at -11.43 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C1F6)
    (at -1.27 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C1EC)
    (at 22.86 -35.56)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C1E2)
    (at -19.05 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C1D8)
    (at -13.97 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C1CE)
    (at 8.89 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C1C4)
    (at 16.51 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C1BA)
    (at -6.35 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C1B0)
    (at 11.43 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C1A6)
    (at 1.27 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C19C)
    (at -8.89 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C192)
    (at -16.51 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C188)
    (at 6.35 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7C17E)
    (at 3.81 -36.83)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C174)
    (at -22.86 -35.56)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C141)
    (at 10.16 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C137)
    (at 12.7 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C12D)
    (at 15.24 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C123)
    (at 7.62 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C0F1)
    (at 5.08 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C0E7)
    (at 0 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C0DD)
    (at -2.54 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C0D3)
    (at 2.54 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C08C)
    (at -5.08 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C082)
    (at -7.62 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C046)
    (at -10.16 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C01D)
    (at -12.7 -47.625 90)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05 90) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05 90) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0 90) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27 90) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7C004)
    (at 22.86 -38.1)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BFAD)
    (at 16.51 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BFA3)
    (at 19.05 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BF85)
    (at -16.51 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BF7B)
    (at -19.05 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BE0F)
    (at 13.97 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BE2D)
    (at -3.81 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BEE1)
    (at 11.43 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BEFF)
    (at 1.27 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BF1D)
    (at -8.89 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BE4B)
    (at -11.43 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BF3B)
    (at 6.35 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BE87)
    (at -13.97 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BF59)
    (at 3.81 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BEC3)
    (at -6.35 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BEA5)
    (at 8.89 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BE69)
    (at -1.27 -39.37)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BC1B)
    (at 13.97 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BC11)
    (at -6.35 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BC07)
    (at -3.81 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBFD)
    (at 3.81 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBF3)
    (at 11.43 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBE9)
    (at 1.27 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBDF)
    (at -8.89 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBD5)
    (at 8.89 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBCB)
    (at -1.27 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBC1)
    (at -11.43 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBB7)
    (at 6.35 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7BBAD)
    (at -13.97 -41.91)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B9C3)
    (at 6.35 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B9B9)
    (at 13.97 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B9AF)
    (at 11.43 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B9A5)
    (at 8.89 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B971)
    (at 3.81 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B967)
    (at 1.27 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B95D)
    (at -1.27 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B953)
    (at -3.81 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B934)
    (at -6.35 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B92A)
    (at -8.89 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB7B8EE)
    (at -11.43 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module MountingHole:MountingHole_4.3mm_M4 (layer F.Cu) (tedit 5FB6DC9E) (tstamp 5FB6DF19)
    (at -20 45)
    (descr "Mounting Hole 4.3mm, no annular, M4")
    (tags "mounting hole 4.3mm no annular m4")
    (attr virtual)
    (fp_text reference REF** (at 0 -5.3) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_4.3mm_M4 (at 0 5.3) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 4.3 0) (layer Cmts.User) (width 0.15))
    (fp_circle (center 0 0) (end 4.55 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0.3 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 thru_hole circle (at 0 0) (size 8 8) (drill 4.3) (layers *.Cu *.Mask))
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79055) (tstamp 5FB7BFE5)
    (at -22.86 -38.1)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_line (start -2 -1.25) (end -2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start -2 1.25) (end 2 1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 1.25) (end 2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_line (start 2 -1.25) (end -2 -1.25) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 -1.27) (size 3.5 2) (drill 1.4) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (module MountingHole:MountingHole_4.3mm_M4 (layer F.Cu) (tedit 5FB6DC9E) (tstamp 5FB6DF0B)
    (at 20 45)
    (descr "Mounting Hole 4.3mm, no annular, M4")
    (tags "mounting hole 4.3mm no annular m4")
    (attr virtual)
    (fp_text reference REF** (at 0 -5.3) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_4.3mm_M4 (at 0 5.3) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 4.55 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 4.3 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 thru_hole circle (at 0 0) (size 8 8) (drill 4.3) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_4.3mm_M4 (layer F.Cu) (tedit 5FB6DC9E) (tstamp 5FB6DEFD)
    (at 20 -45)
    (descr "Mounting Hole 4.3mm, no annular, M4")
    (tags "mounting hole 4.3mm no annular m4")
    (attr virtual)
    (fp_text reference REF** (at 0 -5.3) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_4.3mm_M4 (at 0 5.3) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 4.3 0) (layer Cmts.User) (width 0.15))
    (fp_circle (center 0 0) (end 4.55 0) (layer F.CrtYd) (width 0.05))
    (fp_text user %R (at 0.3 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 thru_hole circle (at 0 0) (size 8 8) (drill 4.3) (layers *.Cu *.Mask))
  )

  (module MountingHole:MountingHole_4.3mm_M4 (layer F.Cu) (tedit 5FB6DC9E) (tstamp 5FB6F459)
    (at -20 -45)
    (descr "Mounting Hole 4.3mm, no annular, M4")
    (tags "mounting hole 4.3mm no annular m4")
    (attr virtual)
    (fp_text reference REF** (at 0 -5.3) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value MountingHole_4.3mm_M4 (at 0 5.3) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_circle (center 0 0) (end 4.55 0) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 4.3 0) (layer Cmts.User) (width 0.15))
    (fp_text user %R (at 0.3 0) (layer F.Fab)
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (pad 1 thru_hole circle (at 0 0) (size 8 8) (drill 4.3) (layers *.Cu *.Mask))
  )

  (module Connector_Wire:SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (layer F.Cu) (tedit 5FB79070) (tstamp 5FB79093)
    (at -13.97 -44.45)
    (descr "Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator")
    (tags "connector wire 0.127sqmm")
    (attr virtual)
    (fp_text reference REF** (at 0 -2.05) (layer F.SilkS) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_text value SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm (at 0 2.05) (layer F.Fab) hide
      (effects (font (size 1 1) (thickness 0.15)))
    )
    (fp_line (start 1.27 -1.27) (end -1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start 1.27 1.27) (end 1.27 -1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 1.27) (end 1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_line (start -1.27 -1.27) (end -1.27 1.27) (layer F.CrtYd) (width 0.05))
    (fp_circle (center 0 0) (end 0.5 0) (layer F.Fab) (width 0.1))
    (fp_text user %R (at 0 0) (layer F.Fab)
      (effects (font (size 0.25 0.25) (thickness 0.04)))
    )
    (pad "" np_thru_hole roundrect (at 0 0) (size 2 2) (drill 1) (layers B.Cu B.Mask) (roundrect_rratio 0.147))
    (model ${KISYS3DMOD}/Connector_Wire.3dshapes/SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm.wrl
      (at (xyz 0 0 0))
      (scale (xyz 1 1 1))
      (rotate (xyz 0 0 0))
    )
  )

  (gr_line (start 16.51 -39.37) (end 22.86 -39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB8EA05))
  (gr_line (start -22.86 -39.37) (end -16.51 -39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB8EA04))
  (gr_line (start -22.86 39.37) (end -16.51 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB85708))
  (gr_line (start 13.97 -39.37) (end 13.97 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BFC))
  (gr_line (start 8.89 -39.37) (end 8.89 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BFB))
  (gr_line (start 11.43 -39.37) (end 11.43 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BFA))
  (gr_line (start 6.35 -39.37) (end 6.35 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BF9))
  (gr_line (start 3.81 -39.37) (end 3.81 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BF4))
  (gr_line (start 1.27 -39.37) (end 1.27 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BF3))
  (gr_line (start -1.27 -39.37) (end -1.27 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BF2))
  (gr_line (start -3.81 -39.37) (end -3.81 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BF1))
  (gr_line (start -6.35 -39.37) (end -6.35 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BEE))
  (gr_line (start -8.89 -39.37) (end -8.89 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BED))
  (gr_line (start -11.43 -39.37) (end -11.43 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB88BEB))
  (gr_line (start -6.35 1.27) (end -6.35 36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85934))
  (gr_line (start -8.89 1.27) (end -8.89 36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85933))
  (gr_line (start 8.89 1.27) (end 8.89 36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85930))
  (gr_line (start 6.35 1.27) (end 6.35 36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB8592F))
  (gr_line (start 8.89 -36.83) (end 8.89 -1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB8592C))
  (gr_line (start 6.35 -36.83) (end 6.35 -1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB8592B))
  (gr_line (start -6.35 -36.83) (end -6.35 -1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB858F2))
  (gr_line (start -8.89 -36.83) (end -8.89 -1.27) (layer F.SilkS) (width 0.25))
  (gr_line (start -13.97 47.625) (end -13.97 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858CB))
  (gr_line (start -3.81 47.625) (end -3.81 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858CA))
  (gr_line (start -1.27 47.625) (end -1.27 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C9))
  (gr_line (start 1.27 47.625) (end 1.27 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C8))
  (gr_line (start 3.81 47.625) (end 3.81 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C7))
  (gr_line (start -11.43 47.625) (end -11.43 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C6))
  (gr_line (start -8.89 47.625) (end -8.89 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C5))
  (gr_line (start -6.35 47.625) (end -6.35 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C4))
  (gr_line (start 8.89 47.625) (end 8.89 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C3))
  (gr_line (start 13.97 47.625) (end 13.97 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C2))
  (gr_line (start 6.35 47.625) (end 6.35 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C1))
  (gr_line (start 11.43 47.625) (end 11.43 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB858C0))
  (gr_line (start -13.97 -39.37) (end -13.97 -47.625) (layer F.SilkS) (width 0.25) (tstamp 5FB85730))
  (gr_line (start 11.43 36.83) (end 22.86 36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85707))
  (gr_line (start -3.81 36.83) (end 3.81 36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85706))
  (gr_line (start 16.51 39.37) (end 22.86 39.37) (layer F.SilkS) (width 0.25) (tstamp 5FB85705))
  (gr_line (start -22.86 36.83) (end -11.43 36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85704))
  (gr_line (start 11.43 31.75) (end 22.86 31.75) (layer F.SilkS) (width 0.25) (tstamp 5FB856FC))
  (gr_line (start -22.86 34.29) (end -11.43 34.29) (layer F.SilkS) (width 0.25) (tstamp 5FB856FB))
  (gr_line (start 11.43 34.29) (end 22.86 34.29) (layer F.SilkS) (width 0.25) (tstamp 5FB856FA))
  (gr_line (start -3.81 34.29) (end 3.81 34.29) (layer F.SilkS) (width 0.25) (tstamp 5FB856F9))
  (gr_line (start -3.81 31.75) (end 3.81 31.75) (layer F.SilkS) (width 0.25) (tstamp 5FB856F8))
  (gr_line (start -22.86 31.75) (end -11.43 31.75) (layer F.SilkS) (width 0.25) (tstamp 5FB856F7))
  (gr_line (start -3.81 26.67) (end 3.81 26.67) (layer F.SilkS) (width 0.25) (tstamp 5FB856F0))
  (gr_line (start -22.86 29.21) (end -11.43 29.21) (layer F.SilkS) (width 0.25) (tstamp 5FB856EF))
  (gr_line (start 11.43 29.21) (end 22.86 29.21) (layer F.SilkS) (width 0.25) (tstamp 5FB856EE))
  (gr_line (start -22.86 26.67) (end -11.43 26.67) (layer F.SilkS) (width 0.25) (tstamp 5FB856ED))
  (gr_line (start -3.81 29.21) (end 3.81 29.21) (layer F.SilkS) (width 0.25) (tstamp 5FB856EC))
  (gr_line (start 11.43 26.67) (end 22.86 26.67) (layer F.SilkS) (width 0.25) (tstamp 5FB856EB))
  (gr_line (start 11.43 21.59) (end 22.86 21.59) (layer F.SilkS) (width 0.25) (tstamp 5FB856E4))
  (gr_line (start -22.86 24.13) (end -11.43 24.13) (layer F.SilkS) (width 0.25) (tstamp 5FB856E3))
  (gr_line (start -22.86 21.59) (end -11.43 21.59) (layer F.SilkS) (width 0.25) (tstamp 5FB856E2))
  (gr_line (start -3.81 21.59) (end 3.81 21.59) (layer F.SilkS) (width 0.25) (tstamp 5FB856E1))
  (gr_line (start -3.81 24.13) (end 3.81 24.13) (layer F.SilkS) (width 0.25) (tstamp 5FB856E0))
  (gr_line (start 11.43 24.13) (end 22.86 24.13) (layer F.SilkS) (width 0.25) (tstamp 5FB856DF))
  (gr_line (start -3.81 16.51) (end 3.81 16.51) (layer F.SilkS) (width 0.25) (tstamp 5FB856D8))
  (gr_line (start -22.86 19.05) (end -11.43 19.05) (layer F.SilkS) (width 0.25) (tstamp 5FB856D7))
  (gr_line (start 11.43 19.05) (end 22.86 19.05) (layer F.SilkS) (width 0.25) (tstamp 5FB856D6))
  (gr_line (start 11.43 16.51) (end 22.86 16.51) (layer F.SilkS) (width 0.25) (tstamp 5FB856D5))
  (gr_line (start -3.81 19.05) (end 3.81 19.05) (layer F.SilkS) (width 0.25) (tstamp 5FB856D4))
  (gr_line (start -22.86 16.51) (end -11.43 16.51) (layer F.SilkS) (width 0.25) (tstamp 5FB856D3))
  (gr_line (start 11.43 13.97) (end 22.86 13.97) (layer F.SilkS) (width 0.25) (tstamp 5FB856CC))
  (gr_line (start -3.81 11.43) (end 3.81 11.43) (layer F.SilkS) (width 0.25) (tstamp 5FB856CB))
  (gr_line (start -22.86 13.97) (end -11.43 13.97) (layer F.SilkS) (width 0.25) (tstamp 5FB856CA))
  (gr_line (start 11.43 11.43) (end 22.86 11.43) (layer F.SilkS) (width 0.25) (tstamp 5FB856C9))
  (gr_line (start -3.81 13.97) (end 3.81 13.97) (layer F.SilkS) (width 0.25) (tstamp 5FB856C8))
  (gr_line (start -22.86 11.43) (end -11.43 11.43) (layer F.SilkS) (width 0.25) (tstamp 5FB856C7))
  (gr_line (start -3.81 6.35) (end 3.81 6.35) (layer F.SilkS) (width 0.25) (tstamp 5FB856C0))
  (gr_line (start -22.86 8.89) (end -11.43 8.89) (layer F.SilkS) (width 0.25) (tstamp 5FB856BF))
  (gr_line (start 11.43 6.35) (end 22.86 6.35) (layer F.SilkS) (width 0.25) (tstamp 5FB856BE))
  (gr_line (start 11.43 8.89) (end 22.86 8.89) (layer F.SilkS) (width 0.25) (tstamp 5FB856BD))
  (gr_line (start -3.81 8.89) (end 3.81 8.89) (layer F.SilkS) (width 0.25) (tstamp 5FB856BC))
  (gr_line (start -22.86 6.35) (end -11.43 6.35) (layer F.SilkS) (width 0.25) (tstamp 5FB856BB))
  (gr_line (start -3.81 1.27) (end 3.81 1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB856B4))
  (gr_line (start -22.86 3.81) (end -11.43 3.81) (layer F.SilkS) (width 0.25) (tstamp 5FB856B3))
  (gr_line (start 11.43 1.27) (end 22.86 1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB856B2))
  (gr_line (start 11.43 3.81) (end 22.86 3.81) (layer F.SilkS) (width 0.25) (tstamp 5FB856B1))
  (gr_line (start -3.81 3.81) (end 3.81 3.81) (layer F.SilkS) (width 0.25) (tstamp 5FB856B0))
  (gr_line (start -22.86 1.27) (end -11.43 1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB856AF))
  (gr_line (start -22.86 -1.27) (end -11.43 -1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB856A8))
  (gr_line (start 11.43 -3.81) (end 22.86 -3.81) (layer F.SilkS) (width 0.25) (tstamp 5FB856A7))
  (gr_line (start -3.81 -3.81) (end 3.81 -3.81) (layer F.SilkS) (width 0.25) (tstamp 5FB856A6))
  (gr_line (start 11.43 -1.27) (end 22.86 -1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB856A5))
  (gr_line (start -3.81 -1.27) (end 3.81 -1.27) (layer F.SilkS) (width 0.25) (tstamp 5FB856A4))
  (gr_line (start -22.86 -3.81) (end -11.43 -3.81) (layer F.SilkS) (width 0.25) (tstamp 5FB856A3))
  (gr_line (start -22.86 -6.35) (end -11.43 -6.35) (layer F.SilkS) (width 0.25) (tstamp 5FB8569C))
  (gr_line (start 11.43 -8.89) (end 22.86 -8.89) (layer F.SilkS) (width 0.25) (tstamp 5FB8569B))
  (gr_line (start 11.43 -6.35) (end 22.86 -6.35) (layer F.SilkS) (width 0.25) (tstamp 5FB8569A))
  (gr_line (start -3.81 -6.35) (end 3.81 -6.35) (layer F.SilkS) (width 0.25) (tstamp 5FB85699))
  (gr_line (start -22.86 -8.89) (end -11.43 -8.89) (layer F.SilkS) (width 0.25) (tstamp 5FB85698))
  (gr_line (start -3.81 -8.89) (end 3.81 -8.89) (layer F.SilkS) (width 0.25) (tstamp 5FB85697))
  (gr_line (start 11.43 -13.97) (end 22.86 -13.97) (layer F.SilkS) (width 0.25) (tstamp 5FB85690))
  (gr_line (start -3.81 -11.43) (end 3.81 -11.43) (layer F.SilkS) (width 0.25) (tstamp 5FB8568F))
  (gr_line (start -22.86 -11.43) (end -11.43 -11.43) (layer F.SilkS) (width 0.25) (tstamp 5FB8568E))
  (gr_line (start 11.43 -11.43) (end 22.86 -11.43) (layer F.SilkS) (width 0.25) (tstamp 5FB8568D))
  (gr_line (start -22.86 -13.97) (end -11.43 -13.97) (layer F.SilkS) (width 0.25) (tstamp 5FB8568C))
  (gr_line (start -3.81 -13.97) (end 3.81 -13.97) (layer F.SilkS) (width 0.25) (tstamp 5FB8568B))
  (gr_line (start -3.81 -19.05) (end 3.81 -19.05) (layer F.SilkS) (width 0.25) (tstamp 5FB85684))
  (gr_line (start -3.81 -16.51) (end 3.81 -16.51) (layer F.SilkS) (width 0.25) (tstamp 5FB85683))
  (gr_line (start 11.43 -19.05) (end 22.86 -19.05) (layer F.SilkS) (width 0.25) (tstamp 5FB85682))
  (gr_line (start -22.86 -16.51) (end -11.43 -16.51) (layer F.SilkS) (width 0.25) (tstamp 5FB85681))
  (gr_line (start 11.43 -16.51) (end 22.86 -16.51) (layer F.SilkS) (width 0.25) (tstamp 5FB85680))
  (gr_line (start -22.86 -19.05) (end -11.43 -19.05) (layer F.SilkS) (width 0.25) (tstamp 5FB8567F))
  (gr_line (start -22.86 -24.13) (end -11.43 -24.13) (layer F.SilkS) (width 0.25) (tstamp 5FB85678))
  (gr_line (start -22.86 -21.59) (end -11.43 -21.59) (layer F.SilkS) (width 0.25) (tstamp 5FB85677))
  (gr_line (start 11.43 -21.59) (end 22.86 -21.59) (layer F.SilkS) (width 0.25) (tstamp 5FB85676))
  (gr_line (start 11.43 -24.13) (end 22.86 -24.13) (layer F.SilkS) (width 0.25) (tstamp 5FB85675))
  (gr_line (start -3.81 -24.13) (end 3.81 -24.13) (layer F.SilkS) (width 0.25) (tstamp 5FB85674))
  (gr_line (start -3.81 -21.59) (end 3.81 -21.59) (layer F.SilkS) (width 0.25) (tstamp 5FB85673))
  (gr_line (start -22.86 -26.67) (end -11.43 -26.67) (layer F.SilkS) (width 0.25) (tstamp 5FB8566C))
  (gr_line (start -3.81 -26.67) (end 3.81 -26.67) (layer F.SilkS) (width 0.25) (tstamp 5FB8566B))
  (gr_line (start 11.43 -26.67) (end 22.86 -26.67) (layer F.SilkS) (width 0.25) (tstamp 5FB8566A))
  (gr_line (start 11.43 -29.21) (end 22.86 -29.21) (layer F.SilkS) (width 0.25) (tstamp 5FB85669))
  (gr_line (start -3.81 -29.21) (end 3.81 -29.21) (layer F.SilkS) (width 0.25) (tstamp 5FB85668))
  (gr_line (start -22.86 -29.21) (end -11.43 -29.21) (layer F.SilkS) (width 0.25) (tstamp 5FB85667))
  (gr_line (start -3.81 -31.75) (end 3.81 -31.75) (layer F.SilkS) (width 0.25) (tstamp 5FB85660))
  (gr_line (start 11.43 -34.29) (end 22.86 -34.29) (layer F.SilkS) (width 0.25) (tstamp 5FB8565F))
  (gr_line (start -22.86 -31.75) (end -11.43 -31.75) (layer F.SilkS) (width 0.25) (tstamp 5FB8565E))
  (gr_line (start -22.86 -34.29) (end -11.43 -34.29) (layer F.SilkS) (width 0.25) (tstamp 5FB8565D))
  (gr_line (start 11.43 -31.75) (end 22.86 -31.75) (layer F.SilkS) (width 0.25) (tstamp 5FB8565C))
  (gr_line (start -3.81 -34.29) (end 3.81 -34.29) (layer F.SilkS) (width 0.25) (tstamp 5FB8565B))
  (gr_line (start 11.43 -36.83) (end 22.86 -36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85657))
  (gr_line (start -22.86 -36.83) (end -11.43 -36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85656))
  (gr_line (start -3.81 -36.83) (end 3.81 -36.83) (layer F.SilkS) (width 0.25) (tstamp 5FB85655))
  (gr_arc (start -20 -45) (end -20 -50) (angle -90) (layer Edge.Cuts) (width 0.05))
  (gr_arc (start 20 -45) (end 25 -45) (angle -90) (layer Edge.Cuts) (width 0.05))
  (gr_arc (start 20 45) (end 20 50) (angle -90) (layer Edge.Cuts) (width 0.05))
  (gr_arc (start -20 45) (end -25 45) (angle -90) (layer Edge.Cuts) (width 0.05))
  (gr_poly (pts (xy 25 50) (xy -25 50) (xy -25 -50) (xy 25 -50)) (layer F.Mask) (width 0.1))
  (gr_line (start 20 -50) (end -20 -50) (layer Edge.Cuts) (width 0.05) (tstamp 5FB68868))
  (gr_line (start 25 45) (end 25 -45) (layer Edge.Cuts) (width 0.05))
  (gr_line (start -20 50) (end 20 50) (layer Edge.Cuts) (width 0.05))
  (gr_line (start -25 -45) (end -25 45) (layer Edge.Cuts) (width 0.05))

  (segment (start -11.43 -36.83) (end -22.86 -36.83) (width 2) (layer B.Cu) (net 0))
  (segment (start 3.81 -36.83) (end -3.81 -36.83) (width 2) (layer B.Cu) (net 0))
  (segment (start 11.43 -36.83) (end 22.86 -36.83) (width 2) (layer B.Cu) (net 0))
  (segment (start 11.43 -34.29) (end 22.86 -34.29) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85522))
  (segment (start 11.43 -31.75) (end 22.86 -31.75) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85523))
  (segment (start 11.43 -29.21) (end 22.86 -29.21) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85526))
  (segment (start 11.43 -26.67) (end 22.86 -26.67) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85527))
  (segment (start 11.43 -24.13) (end 22.86 -24.13) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8552A))
  (segment (start 11.43 -21.59) (end 22.86 -21.59) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8552B))
  (segment (start 11.43 -19.05) (end 22.86 -19.05) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8552E))
  (segment (start 11.43 -16.51) (end 22.86 -16.51) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8552F))
  (segment (start 11.43 -8.89) (end 22.86 -8.89) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85530))
  (segment (start 11.43 -3.81) (end 22.86 -3.81) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85531))
  (segment (start 11.43 -1.27) (end 22.86 -1.27) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85532))
  (segment (start 11.43 -6.35) (end 22.86 -6.35) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85533))
  (segment (start 11.43 -13.97) (end 22.86 -13.97) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85534))
  (segment (start 11.43 -11.43) (end 22.86 -11.43) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85535))
  (segment (start 11.43 3.81) (end 22.86 3.81) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8553E))
  (segment (start 11.43 16.51) (end 22.86 16.51) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8553F))
  (segment (start 11.43 19.05) (end 22.86 19.05) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85540))
  (segment (start 11.43 1.27) (end 22.86 1.27) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85541))
  (segment (start 11.43 11.43) (end 22.86 11.43) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85542))
  (segment (start 11.43 13.97) (end 22.86 13.97) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85543))
  (segment (start 11.43 6.35) (end 22.86 6.35) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85544))
  (segment (start 11.43 8.89) (end 22.86 8.89) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85545))
  (segment (start 11.43 24.13) (end 22.86 24.13) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8554F))
  (segment (start 11.43 36.83) (end 22.86 36.83) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85550))
  (segment (start 11.43 31.75) (end 22.86 31.75) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85551))
  (segment (start 11.43 34.29) (end 22.86 34.29) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85552))
  (segment (start 11.43 29.21) (end 22.86 29.21) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85553))
  (segment (start 11.43 26.67) (end 22.86 26.67) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85554))
  (segment (start 11.43 21.59) (end 22.86 21.59) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85555))
  (segment (start -22.86 26.67) (end -11.43 26.67) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8555E))
  (segment (start -22.86 24.13) (end -11.43 24.13) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8555F))
  (segment (start -22.86 31.75) (end -11.43 31.75) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85561))
  (segment (start -22.86 36.83) (end -11.43 36.83) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85562))
  (segment (start -22.86 21.59) (end -11.43 21.59) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85563))
  (segment (start -22.86 34.29) (end -11.43 34.29) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85564))
  (segment (start -22.86 29.21) (end -11.43 29.21) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85565))
  (segment (start -22.86 8.89) (end -11.43 8.89) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8556E))
  (segment (start -22.86 3.81) (end -11.43 3.81) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8556F))
  (segment (start -22.86 1.27) (end -11.43 1.27) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85570))
  (segment (start -22.86 13.97) (end -11.43 13.97) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85571))
  (segment (start -22.86 6.35) (end -11.43 6.35) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85572))
  (segment (start -22.86 19.05) (end -11.43 19.05) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85573))
  (segment (start -22.86 11.43) (end -11.43 11.43) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85574))
  (segment (start -22.86 16.51) (end -11.43 16.51) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85575))
  (segment (start -22.86 -8.89) (end -11.43 -8.89) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8557E))
  (segment (start -22.86 -16.51) (end -11.43 -16.51) (width 2) (layer B.Cu) (net 0) (tstamp 5FB8557F))
  (segment (start -22.86 -13.97) (end -11.43 -13.97) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85580))
  (segment (start -22.86 -3.81) (end -11.43 -3.81) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85581))
  (segment (start -22.86 -6.35) (end -11.43 -6.35) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85582))
  (segment (start -22.86 -19.05) (end -11.43 -19.05) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85583))
  (segment (start -22.86 -1.27) (end -11.43 -1.27) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85584))
  (segment (start -22.86 -11.43) (end -11.43 -11.43) (width 2) (layer B.Cu) (net 0) (tstamp 5FB85585))
  (segment (start -11.43 -31.75) (end -22.86 -31.75) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855A2))
  (segment (start -11.43 -34.29) (end -22.86 -34.29) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855A3))
  (segment (start -11.43 -26.67) (end -22.86 -26.67) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855A6))
  (segment (start -11.43 -29.21) (end -22.86 -29.21) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855A7))
  (segment (start -11.43 -21.59) (end -22.86 -21.59) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855AA))
  (segment (start -11.43 -24.13) (end -22.86 -24.13) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855AB))
  (segment (start -3.81 -34.29) (end 3.81 -34.29) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855AF))
  (segment (start 3.81 -31.75) (end -3.81 -31.75) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855B0))
  (segment (start 3.81 -26.67) (end -3.81 -26.67) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855B3))
  (segment (start -3.81 -29.21) (end 3.81 -29.21) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855B4))
  (segment (start 3.81 -21.59) (end -3.81 -21.59) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855B7))
  (segment (start -3.81 -24.13) (end 3.81 -24.13) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855B8))
  (segment (start 3.81 -6.35) (end -3.81 -6.35) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855BC))
  (segment (start 3.81 -11.43) (end -3.81 -11.43) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855BD))
  (segment (start -3.81 -8.89) (end 3.81 -8.89) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855BE))
  (segment (start 3.81 -1.27) (end -3.81 -1.27) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855BF))
  (segment (start -3.81 -3.81) (end 3.81 -3.81) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855C0))
  (segment (start -3.81 -13.97) (end 3.81 -13.97) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855C1))
  (segment (start -3.81 -19.05) (end 3.81 -19.05) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855C2))
  (segment (start 3.81 -16.51) (end -3.81 -16.51) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855C3))
  (segment (start -3.81 1.27) (end 3.81 1.27) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855CC))
  (segment (start -3.81 16.51) (end 3.81 16.51) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855CD))
  (segment (start -3.81 6.35) (end 3.81 6.35) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855CE))
  (segment (start 3.81 8.89) (end -3.81 8.89) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855CF))
  (segment (start -3.81 11.43) (end 3.81 11.43) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855D0))
  (segment (start 3.81 19.05) (end -3.81 19.05) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855D1))
  (segment (start 3.81 13.97) (end -3.81 13.97) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855D2))
  (segment (start 3.81 3.81) (end -3.81 3.81) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855D3))
  (segment (start -3.81 21.59) (end 3.81 21.59) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855DD))
  (segment (start -3.81 36.83) (end 3.81 36.83) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855DE))
  (segment (start 3.81 34.29) (end -3.81 34.29) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855DF))
  (segment (start -3.81 26.67) (end 3.81 26.67) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855E0))
  (segment (start -3.81 31.75) (end 3.81 31.75) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855E1))
  (segment (start 3.81 24.13) (end -3.81 24.13) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855E2))
  (segment (start 3.81 29.21) (end -3.81 29.21) (width 2) (layer B.Cu) (net 0) (tstamp 5FB855E3))
  (segment (start -22.86 -39.37) (end -16.51 -39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start 22.86 -39.37) (end 16.51 -39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start -13.97 -47.625) (end -13.97 -39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start -11.43 -39.37) (end -11.43 -47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start -8.89 -47.625) (end -8.89 -39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start -6.35 -39.37) (end -6.35 -47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start -3.81 -47.625) (end -3.81 -39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start -1.27 -39.37) (end -1.27 -47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start 1.27 -47.625) (end 1.27 -39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start 3.81 -39.37) (end 3.81 -47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start 6.35 -47.625) (end 6.35 -39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start 8.89 -39.37) (end 8.89 -47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start 11.43 -47.625) (end 11.43 -39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start 13.97 -39.37) (end 13.97 -47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start -8.89 -36.83) (end -8.89 -1.27) (width 2) (layer B.Cu) (net 0))
  (segment (start -6.35 -1.27) (end -6.35 -36.83) (width 2) (layer B.Cu) (net 0))
  (segment (start 6.35 -36.83) (end 6.35 -1.27) (width 2) (layer B.Cu) (net 0))
  (segment (start 8.89 -1.27) (end 8.89 -36.83) (width 2) (layer B.Cu) (net 0))
  (segment (start -13.97 39.37) (end -13.97 47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start -11.43 47.625) (end -11.43 39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start -8.89 39.37) (end -8.89 47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start -6.35 47.625) (end -6.35 39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start -3.81 39.37) (end -3.81 47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start -1.27 47.625) (end -1.27 39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start 1.27 39.37) (end 1.27 47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start 3.81 47.625) (end 3.81 39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start 6.35 39.37) (end 6.35 47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start 8.89 47.625) (end 8.89 39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start 11.43 39.37) (end 11.43 47.625) (width 2) (layer B.Cu) (net 0))
  (segment (start 13.97 47.625) (end 13.97 39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start 16.51 39.37) (end 22.86 39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start -16.51 39.37) (end -22.86 39.37) (width 2) (layer B.Cu) (net 0))
  (segment (start -8.89 1.27) (end -8.89 36.83) (width 2) (layer B.Cu) (net 0))
  (segment (start -6.35 36.83) (end -6.35 1.27) (width 2) (layer B.Cu) (net 0))
  (segment (start 6.35 1.27) (end 6.35 36.83) (width 2) (layer B.Cu) (net 0))
  (segment (start 8.89 36.83) (end 8.89 1.27) (width 2) (layer B.Cu) (net 0))

)