Reparatie philips pm3262

I want to renovate osciloscop philips pm3262 ,but the problem is in the specified ic oq 0012 at least 5 of them ,OM504 at least 2 of them and OM518 at least 2 of them. Im interested in the price and I will be thankful if you can help me. I want to remake this osciloscop and not to throw it out in the bin. Thanks again.

the ic's in the philips pm3262 are special made models, not to be found anymore, apart from another unit for spares. this model scope is almost 50 years old by now..

waar rook was, werkt nu iets niet meer
maartenbakker

Golden Member

Triple check that it is really all those IC's that are broken. Seems a bit unlikely and as testman says, they are not readily found anymore.

@flash2b: Oops, sorry, didn't check for on-topic before responding.

[Bericht gewijzigd door maartenbakker op zondag 26 maart 2017 22:42:59 (20%)

www.elba-elektro.nl | "The mind is a funny thing. Sometimes it needs a good whack on the side of the head to jar things loose."
klein is fijn

Moderator

Bovenstaande posts verplaatst naar een eigen topic.

Thank you very much l was sure that the battle selection will be very wery difficult but l sym simple but stubborn and wiith the help of knowledegeable and capable people will have a greater effect