Designed in 2011.
4W into a 50ohm dummy load was obtained with 2N3553.
[Bericht gewijzigd door Joy4444 op zaterdag 21 mei 2022 17:30:56 (88%)
Dit topic is gesloten
Designed in 2011.
4W into a 50ohm dummy load was obtained with 2N3553.
[Bericht gewijzigd door Joy4444 op zaterdag 21 mei 2022 17:30:56 (88%)
Yarr, Matey!
3 to 4 watts from a 2N3553 on 12V is A LOT! 
and i think if you ask other people here they will say way too much too!
Maybe someone out here can give a really good answer.
Being a tinkerer, I don't dare!
I also believe that the schematic is not 100% correct,
BUT who am I...
Greetings from here!
Rob
And by the way, don't be discouraged by the narrow-minded people here on the forum.
There are always those who...
Del
[Bericht gewijzigd door Joy4444 op zaterdag 21 mei 2022 17:31:05 (100%)
Dit topic is gesloten